You may have to use a flathead or Phillips screwdriver to remove any covering panels to access the lights. The ground is one of the more crucial steps in this process. Select ribbon style lights if you want to bend the lights around corners, or choose a bar LED light to fit in one spot. They will show off your fashionably modern rim and will also create a customized look for your car. If the frame is not making good enough contact with the body of your car, use gauge wire to create a ground wire, attach it somewhere on the frame of the LED lights, and run the wire to a bolt on the metal frame of the car.
Pass the earth wire of your LED lights through the body of your car to the trunk.
How to Install Your Own Driving Lights
There are many different brands out there, so look for a reputable manufacturer. Step 1 Disconnect the negative cable from your car's battery. The under dash lights can have different settings of when they are turned on. March 29, The most common place is on the plastic under the dash. If the wiring of the LED strip on the rear bumper is not long enough to reach the front of the vehicle, you may use the extension wires that come with the package. To come on with headlights: